Getting started
R&S
®
TSME6
28User Manual 4900.0033.02 ─ 08
Figure 3-10: LAN cable connected to LAN connectors of 2 R&S
TSME6 devices
1 = LAN cable
3.1.6.3 LTE MIMO setup with four R&S TSME6s
If four R&S TSME6s are connected to one host PC, multiple signals can be received
by four receive antennas and processed in one application. It is useful, for example, to
perform LTE MIMO path measurements or throughput/CQI estimations (in addition to
the results using two R&S TSME6s).
Table 3-3: Required options for sample (minimum) configuration for LTE MIMO measurements with 4
R&S
TSME6s
R&S TSME6 Option
1 KxB, LTE (K29), LTE MIMO (K30)
2 None (MIMO extension option R&S TSME6-K300 installed by default)
3 None (MIMO extension option R&S TSME6-K300 installed by default)
4 None (MIMO extension option R&S TSME6-K300 installed by default)
Required connections
1. Connect the SYNC-cable to the Aux. connectors of all R&S TSME6 devices in this
setup.
Preparing for use
To Next Page
Loading...