Rohde & Schwarz R&S TSME6 - Configuring Antenna Properties - Antenna Configuration

Configuring the R&S TSME6
R&S
®
TSME6
59User Manual 4900.0033.02 ─ 08
ForR&S ViCom and ROMES, the API allows only the configuration of frequencies
of activated antenna ports.
Accept Configuration
To confirm the current configuration settings, select the "Accept Configuration" button.
6.1.8 Configuring antenna properties - "Antenna Configuration"
In this tab, you can configure the individual antenna properties. These configuration
values are saved in the measurement files and can be displayed in the related applica-
tion user interfaces.
Available Antenna Ports
Displays the available antenna ports of the device.
Antenna Type
This setting defines the antenna type.
"not set"
The antenna type is not specified.
"omnidirec-
tional antenna"
Specifies an omnidirectional antenna.
"directed
antenna"
Specifies a directed antenna. For downtilt, see "Downtilt [-90° to
+90°]" on page 60.
Direction [0° to 359°]
This setting defines the antenna direction.
If the antenna mounting is fixed, the direction is absolute defined as follows.
Using the R&S TSME device manager