Configuring the R&S TSME6
R&S
®
TSME6
60User Manual 4900.0033.02 ─ 08
"0°" North
"90°" East
"180°" South
"270°" West
If the antenna mounting is motion direction, the direction is clockwise defined as fol-
lows.
"0°" in driving direction (heading)
"90°" to the right side
"180°" backwards
"270°" to the left side
Polarization Type
Displays the antenna polarization type.
"not set"
The polarization type is not specified.
"linear polar-
ized"
The antenna polarization is linear.
"circular polar-
ized"
The antenna polarization is circular.
"elliptical polar-
ized"
The antenna polarization is elliptical.
Polarization Angle [0° to 90°]
This setting is used for linear polarized antennas.
"0°"
Horizontal
"90°"
Vertical
Downtilt [-90° to +90°]
This setting is used for directed antennas.
"0°"
The antenna is not tilted and looks horizontal.
">0°"
The antenna is tilted to the ground.
"<0°"
The antenna is directed to heaven.
Mounting
This setting describes the antenna mounting.
"not set"
The antenna mounting is not specified.
"fixed"
The antenna is fixed for the measurement. The direction is measured
from True North (0°) towards East (90 °).
"motion direc-
tion"
The antenna is mounted in motion direction. For horizontal motion,
add the motion angle in the horizontal plane on the ground, measured
from True North (0°) towards East (90 °) with the antenna direction to
get the current antenna direction in the horizontal plane.
Using the R&S TSME device manager
To Next Page
Loading...