Rohde & Schwarz R&S TSME6 - Alignment; Configuration; Configuring Downconverter R&S Tsmexxdc;Tsms53 Dc - Downconverter Configura- Tion

Configuring the R&S TSME6
R&S
®
TSME6
57User Manual 4900.0033.02 ─ 08
Figure 6-6: Tab "Self Alignment"
Start Self Alignment
To start the self-alignment manually, select the "Start Self Alignment" button in the "Self
Alignment" tab of the "R&S TSME Device Manager".
6.1.7 Configuring downconverter R&S TSMExxDC/TSMS53DC - "Down-
converter Configuration"
In this tab, you can configure the IF output receiver and the RF input antenna of the
R&S TSMExxDC/TSMS53DC downconverter. For details, refer to the related down-
converter manual.
Using the R&S TSME device manager