Rohde & Schwarz R&S TSME6 - Aligning R&S TSME6 Manually - Self Alignment

Configuring the R&S TSME6
R&S
®
TSME6
56User Manual 4900.0033.02 ─ 08
Figure 6-5: Tab "Updates"
To perform an update
1. In the "R&S TSME Device Manager", select the serial number of the R&S TSME6
which you want to update.
2. In the "Updates" tab, select the "Update" button for either the "Basic FPGA" or the
"Correction Data".
When updating the correction data, you are asked to select a directory to store a
backup of your current correction data.
6.1.6 Aligning R&S TSME6 manually - "Self Alignment"
During self-alignment, the R&S TSME6 determines alignment values for the I/Q filter
and the I/Q imbalance.
Using the R&S TSME device manager