Configuring the R&S TSME6
R&S
®
TSME6
63User Manual 4900.0033.02 ─ 08
Figure 6-8: R&S ViCom architecture
Install the R&S ViCom package on the host PC. It includes documentation and sample
applications.
Scanner options
To interact with the R&S TSME6 via the R&S ViCom interface, the corresponding scan-
ner options must be installed on the device.
Open the R&S TSME Device Manager to see which scanner options are installed on
the device (see Chapter 6.1.3, "Installing and managing software license keys -
"Options"", on page 51).
For details and information on how to configure the R&S ViCom interface and carry out
measurements with the R&S TSME6, refer to the R&S ViCom manual.
Interacting with ROMES, R&S NESTOR, and R&S ViCom
To Next Page
Loading...