Rohde & Schwarz RTB2000 Series - Page 340

Fernsteuerbefehle
R&S
®
RTB2000
340Bedienhandbuch 1333.1611.03 ─ 05
Rückgabewerte:
<Value> Measurement result. If no measurement was executed, no value
(NAN) is returned.
Verwendung: Nur Abfrage
MEASurement<m>:RESult:AVG? <AverageValue>
Returns the average value of the current measurement series.
The number of waveforms used for calculation is defined with MEASurement<m>:
STATistics:WEIGht.
Suffix:
<m>
.
1..4
Selects the measurement place.
Abfrageparameter:
<AverageValue> Statistic value
Verwendung: Nur Abfrage
MEASurement<m>:RESult:STDDev? <StandardDeviation>
Returns the statistical standard deviation of the current measurement series.
The number of waveforms used for calculation is defined with MEASurement<m>:
STATistics:WEIGht.
Suffix:
<m>
.
1..4
Selects the measurement place.
Abfrageparameter:
<StandardDeviation> Statistic value
Verwendung: Nur Abfrage
MEASurement<m>:RESult:NPEak? <NegativePeak>
Returns the minimum measurement result of the current measurement series.
Suffix:
<m>
.
1..4
Selects the measurement place.
Abfrageparameter:
<NegativePeak> Minimum measurement result
Verwendung: Nur Abfrage
MEASurement<m>:RESult:PPEak? <PositivePeak>
Returns the maximum measurement result of the current measurement series.
Messungen