Roland E-66 - Instrument Care; If your E-66 fails to operate

Instrument Care
* For everyday cleaning wipe
the unit with a soft, dry cloth or
one that has been slightly
dampened with water. To
remove stubborn dirt, use a
mild, non-abrasive detergent.
Afterwards, be sure to wipe the
unit thoroughly with a soft, dry
cloth.
* Never use benzene, thinners,
alcohol or solvents of any kind,
to avoid the possibility of
discoloration and/or
deformation.
If your E-66
fails to operate
Check the following:
* Is the AC adaptor properly
- connected to the DC IN [2]
socket on the rear panel?
* |s the AC adaptor connected
to a wall outlet? (Connect a
lamp or radio to the wall outlet
to test that it's working
properly.)
* |s the POWER switch on?
* If you cannot resolve the
problem, please contact your
retailer or nearest Roland
Service Center.
* Never open the instrument or
attempt any repairs. Refer all
servicing to qualified service
personnel.
102