Roland E-66 - Upper Tone Selection

Upper Tone
Selection
Whenever the instrument is
turned on, the Upper mode is
selected for the right part of the
keyboard and the assigned Tone
will be ‘Nylon СТ.О’ (A41.) that
is, the 2nd variation of the
Guitar tone A 41.
a) Press the SELECT [> button
[45] in the TONE select section
so the UPPER LED lights. This
selects the Upper mode. To
change the Tone, follow this
example:
b) Press the GROUP button
[52] in the TONE select section
to select Tone Group ‘A’ or 'b.'
The display will show the
selected Group, and the TONES
LED [32] will light.
C) Press a button (1—8) in the
TONE select section to choose
the corresponding Bank
number.
(Tones are stored in a Group
(‘A’ or 'b^), Bank (1—8), and
Number position (1—8).
The last field (NUMBER) in the
display [31] will flash and show
a blinking line, as it awaits the
entry of the final digit; the Tone
Number.
d) Press a button (1—8) in the
TONE select section [53] to
choose the Tone Number.
The display will indicate your
Tone selection until you select
another one, or move to a
different function.