Roland E-66 - Selecting Tones

Selecting
Tones
'Nylon GT' (A41.) (2nd
variation of the guitar tone A41)
is automatically selected for the
Upper section every time you
turn on the instrument.
To have this Tone number
displayed, press the SELECT >
button [45]. The UPPER LED
will light and “A41” will
appear in the display.
To select a different Tone for
the Upper section:
a) Be sure the UPPER LED is lit
(if
not,
press
the
SELECT
button
imm
ERI
IAM
E
peg
|
НЕ
45р.
томе
GROUP
b
(9)
b)
Select
the
desired
Tone
from
the
Tone
Group
chart
[9]
printed
on
the
front
panel.
Find 22 FLUTE, for example.
(This Tone happens to belong to
Group ‘b.’)
c) Press the GROUP button
[52] until the letter "b"
(indicating the Tone Group)
appears in the first field of the
display.
The TONE LED [32] will light.
d) Enter the number '22' by
first pressing the '2' button (in
the TONE select section [53]).
The number "2" will appear in 8
the display beside the letter "b". >
(A flashing line will appear т
the third field).
Буни |
28 тусте. 1ЬВИ абий!