Roland E-66 - Playing the E-66

= —.
——
POWER()
—
R
These demonstration songs
were produced by Roland
Europe in cooperation with
LUIGI BRUTI and
ROBERTO LANCIOTTI.
Copyright © 1994 Roland
Europe. All rights reserved.
Playing the E-66
First, connect the AC adaptor to
a wall outlet, and then press the
POWER button [1] as
previously explained.
A number of LEDs will light and
the display will read “A41.”
You can now start playing the
E-66 with a Guitar tone on the
right (Upper) part of the
keyboard, while you can
control the accompaniment
style in the left part (Lower)
With an optional footswitch
(DP-2/DP-6 type) connected to
the SUSTAIN FOOTSWITCH
jack [6] on the rear panel, you
can sustain (hold) the notes you
play in the Upper section of the
keyboard. (This works just like
the damper pedal on an
acoustic piano).
SUSTAIN
FOOT SWITCH (6)
This very brief description
shows you how to use the E-66
in only the most basic way. In
the following pages we'll show
you how to take full advantage
of the instrument's great sounds
and functions.