Roland E-66 - Setting up and Powering up; Placement and Environment Guidelines; Power Connection and Initial Power On

Setting up and
Powering up
After unpacking the instrument,
set it on a solid, flat surface;
preferably a keyboard stand.
Do not subject the unit to
temperature extremes (eg.,
direct sunlight).
Avoid using or storing the unit
in areas of excessive heat or
humidity.
Direct sunlight can deform or
discolor the unit.
Install the music stand.
Be sure the POWER switch ([1]
on the diagram inside the front
cover) is in the OFF position.
Connect the included AC
adaptor to the DC IN
connector [2].
N (2)
Be sure the line voltage in your es
installation meets the power r
requirement specified on the
adaptor.