Roland E-66 - Demo Song Playback and Initial Check

Connect the adaptor to a wall
outlet. P uid
VOLUME (10) /
Set the VOLUME slider [10] to a Sy”
a d
reasonable level (near the DS
mark).
Press the POWER switch [1].
A number of LEDs (Light
Emitting Diodes) will light and
the DISPLAY [31] will read:
“А41.” The dot lit beside the
last number indicates that a
variation for the “A41” Guitar
tone (Nylon GT) has been
selected (see page 36 for further
details).
та ез
~
Press а few keys to ensure that
the instrument is working
properly, or press the DEMO
button [50], and then the
START/STOP button [64].
The E-66 will automatically
play the three Demo songs in
sequence. Press START/STOP
[64] or the DEMO button [50]
when you've heard enough.
Turn the instrument off by
pressing the POWER button
again.