Roland E-66 - Setting the Split Point; Selecting Drum Sets

Setting the Split
Point
The Split Point that divides the
keyboard into two sections
(Upper and Lower) can be
moved to accommodate your
particular playing needs:
a) Press and hold the UPPER
button [27] so the LED begins to |.
flash. ^
b) While continuing to hold
the UPPER button [27], press a
note between C2 and C#4 on
the keyboard (the shaded area
in the fig. ).
The key you press will define
the new boundary between the
two sections.
NOTE:
The new Split Point will be
retained in memory even after
you turn off the power.
Selecting Drum Sets
To enter the Manual Drums
mode:
Press the M DRUMS button [23]
and the LED will light.
Now when you play the
keyboard you'll notice that a
different percussion sound has
been assigned to every key.
(“Drum set" is called each
assignement of different drum
sounds to the keyboard).