Roland E-66 - Recording New and Existing Songs

* Recording a new song
FLOPPY DISK
DRIVE (4)
1) Insert a disk into the disk
drive [4].
2) Press the REC button [42]
and the REC LED will light.
The number of the song
currently being recorded will
now appear in the display. If
you are recording the first song,
the number "1" will appear.
Additional songs will be
numbered progressively.
A disk can store up to 99 songs
3) Press the PLAY button [41]
to start recording or
press the START/STOP button
[64] of the Arranger if you wish
to record directly from the
Arranger: the MIDI File Player
will start recording and the
Arranger will start playing.
о : : ~
хай
AN
ez |
БЕ o START/STOP (64)
. 27 2
*
Recording
over
ап
existing
song
СМ
2
~
C
=
If you wish to record а new
song thereby erasing an existing
one:
1) By pressing the PREV [35]
and NEXT [36] buttons select
the song to be replaced.
2) Press and hold SONG
SELECT [37], then press REC
[42]. The display reads "SUR".
Confirm your choice by
pressing the REC button [42]
once more or exit the operation
pressing any other button.
Now refer back to the recording
procedure.