Roland E-66 - Recording; Disk Formatting

Recording
• What to do prior to
recording:
When you record with your
MIDI File Recorder, the data is
stored directly onto floppy disk.
However, a new disk must first
be 'formatted' (prepared) using
the following procedure:
FLOPPY DISK
| DRIVE (4)
CAUTION
Formatting a disk will erase all
data stored on it. Before
formatting the disk, be sure it
doesn't contain any important
data.
1) Move the protection tab to
the WRITE position and insert
the disk into the disk drive.
2) Press and hold the
FUNCTION button (38) and
then press the REC button (42).
Now release both buttons.
The word “SUr” will appear in
the display, asking if it is OK to
format the disk in the drive.
3) Press the REC button [42] to
start formatting or press any
other button to exit the
formatting operation.
During formatting, numbers
(decreasing from 79 to 0) will
appear in the display beside the
letter “F”.