Roland E-66 - Stopping playback; Tempo setting

* Stopping playback
When the STOP button [40] is
pressed, playback stops
immediately. Playback can be
resumed from that point.
е Removing a disk
›
FLOPPY
DISK
————
from
the
drive:
ОШ
DRIVE
(4
—
CAUTION
Never attempt to remove a disk
from the drive while the drive
is operating.
Be sure that the MIDI File Disk
Recorder is not operating and
then press the EJECT button
located on the drive [4] (rear
panel).
(First press STOP [40] and then
the EJECT button if the drive is
operating).
The DISK LED will indicate the
Disk drive condition: when it is
lit, the drive is operating.
* Tempo setting
Press TEMPO buttons [67] to
change the playback tempo.
While you are setting the
tempo, the display [ 31]
indicates the current value.
Possible values range from 5 to
250 BPM (beats per minute); in
a few seconds, the previous
display will return.
7,
tri
€
( TEMPO (67
=
DISPLAY (31)