Roland E-66 - MIDI Parameters

MIDI connections are made
using special MIDI cables.
These (optional) cables
physically link one MIDI device
to another. For further
information, please refer to
"The Basics of MIDI" (page 79).
MIDI IMPLEMENTATION CHARTS
Technical data is available in
the MIDI Implementation Charts
on pages 108 and 109.
When using the E-66 to control
sound modules (or other
synthesizers), connect the
devices as shown in figure A.
ШЙ
Ш
X RETE
When a MIDI sequencer (or
keyboard) is used to control the
E-66, connect the devices as
shown in figure B.
MIDI IN
MIDI OUT
MIDI Parameters
By pressing the MIDI SELECT
button [43] (so the LED lights) it
is possible to modify the
available MIDI parameters.
(At this time, both the STYLE
[30] and TONES [32] LEDs will
be dark).
_ ASELECT (43) 922“ eae
The display will show the MIDI
parameter and (at the
appropriate time) the currently
assigned value.