Roland E-66 - Lower Tone Selection

Release the VARIATION button
[51].
If you selected a Variation Tone
which exists, a dot (.) will light
in the third field of the display
[31].
When selecting some Tones,
one of the available Variations
will automatically be chosen.
This is again indicated by a dot
(.) beside the third digit in the
display.
The chart on. page 103 shows
which tones (marked by an
asterisk) will be recalled when
selecting GROUP/BANK/
NUMBER.
Lower Tone
Selection
Whenever you turn the E-66 on,
it will automatically select
‘Slow Strings’ (A72) as the
Lower Tone.
a) Press the SELECT [> button
[45] so the LOWER LED lights.
This selects the Lower mode
and the Tone 'Slow Strings.' To
change this Tone, follow this
example:
b) Press the GROUP button
[52] in the TONE select section
to select Tone Group ‘A’ or ‘b.’
The display will show the
selected Group, and the TONES
LED [32] will light.