Roland E-66 - Erasing Styles from Internal Memory

If there is not enough memory
for loading the requested style,
the display will read "MFL"
MEMORY FULL.
Prior to loading other USER
STYLES, erase the unnecessary
ones using the following
procedure.
Erasing Styles from
Internal Memory
1) Press the USER STYLE
button [47] in MUSIC STYLE
section: the display reads “U”
(user).
2) Press and hold the NUMBER
button [49] (1-4) of the USER
STYLE to be erased and
simultaneously press and hold
the FUNCTION button [38] in
the DISK RECORDER section.
3) Press the RESET/ERASE
button [39]; the selected Style
is erased.
NOTE:
USER STYLES created by
devices with greater memory
capacity than the E-66 could
result in Styles too large for
the E-66's internal memory.
However, you will have no
problems when loading the
Styles from the supplied
MSD -101 disk or from
optional Music Styles disks
(Roland MSD series).