Roland E-66 - Page 52

c) Select the number of the
Style to be loaded by pressing
the PREV [35] or NEXT [36]
buttons in the DISK RECORDER
section.
d) Press the button
corresponding to the location of
the USER STYLE [49](1-4) into
which you wish to load the
Style selected from the disk:
now the loading procedure will
begin.
During loading, the DISK LED
[34] is flashing and LOAD LED
[48] will light steadily.
When loading operation is
complete, the DISK LED [34]
will go out and the LOAD LED
[48] will begin flashing again.
During loading, all the Styles
can be selected except for the
User Style currently being
loaded.
If you try loading a style from
disk and select as the
destination the User Style
currently being played, the
message “noP” (NO LOAD) will
appear in the display, indicating
that the operation is not
possible.
Likewise, when loading a USER
STYLE it is not possible to select
it during loading.
When an error is made during
the loading operation the
display will read "dEr".
If you try selecting a User Style
from a disk before loading it
into memory, the message
"Not" will appear in the
display.
DISK (34) 9