Roland E-66 - Using the GM Mode; GM;GS Mode Setup and Connections

Using the GM Mode
The GM/GS mode allows you to | MIDI OUT MIDI IN
use the E-66 as a General MIDI | >
sound module. Using the | 1-
internal MIDI File Player or | il m ҮЛ И] Т
connecting the E-66 to а MIDI А
22. ШІП
(song data) played by the
sequencer can use the Tones
inside the E-66. You can play
along on the E-66's keyboard at
the same time.
Connections:
With a MIDI cable, connect the
MIDI OUT socket of a Playback
device (sequencer or MIDI File
Player) to the MIDI IN socket of
the E-66.
Press and hold the CHORUS
button [55] and the REVERB
ON/OFF button [54]
simultaneously. (Together these
buttons turn the GM/GS mode
on and off). In a couple of
seconds, the TEMPO LEDs [66]
will light.
The display will show the
currently selected Upper Tone.
When playing back GM/GS
song data from a sequencer, it
is possible to achieve the
desired volume balance among
the musical parts using buttons
in the E-66's BALANCE section.
(See the following pages).