Roland E-66 - MIDI Parameter Initialization: Standard Mode

MIDI Parameter
Inizialization:
Standard Mode posue |
ere v
To quickly reset all the standard | | |
mode parameters to their | б E зей
factory default values, follow POWER (1) =
this procedure:
With the E-66 OFF: ===
Press and hold the REC button
[42] of the DISK RECORDER,
and then press the POWER
button [1].
The display reads "FSt" (Factory
Setup).
The default values of all MIDI
parameters are restored.
MIDI Parameters which
can be changed using
assigned buttons and
retained in memory
even when the instru-
ment is turned off.
GM MELODY VOLUME
MASTER TUNE / Common
SPLIT POINT
KBD SCALE ASSIGN (UPPER/ALL)
KBD SCALE / Common*
* When the instrument is turned
off, the standard tuning (the 12-
tone scale) is resumed, but the
tuning previously set will be
retained in memory and can be
recalled by simultaneously
pressing the KBD VELOCITY/
SCALE button and the key
farthest to the right on the
keyboard (the note C).