Roland E-66 - Tone Variations

Tone Variations
A number of the E-66's Tones
have what we call 'Variations.'
These are sounds which are
similar to the basic Tone. (For a
complete list of sounds, please
refer to TONES and
VARIATIONS on page 103: the
tones which have variations are
marked with a |).
To Select a Tone Variation:
Example: To select the second
Variation of 'Piano 1' (A11)
a) Select 'Piano 1' (A11) so the
display reads "A11."
b) Press and hold the
VARIATION button [51] in the
TONE select section; three lines
will appear in the display.
C) You can now proceed in
two
ways:
22
AA
c1) Press the VARIATION
button [51] several times: all
the available variations for the
current tone will be selected in
succession.
c2) While holding the
VARIATION button [51], select
the second Variation by
pressing the '2' button in the
TONE select section. The
number "2" will appear in the
display.