Roland E-66 - Page 35

e) Press the ‘2’ button again (in
the TONE select section [53])
and the number "2" will appear
in the third field of the display.
The selected Tone is "b22"
(flute).
Now when you play the right
part of the keyboard (Upper
section) you'll hear a lovely
flute sound!
f) If you wish to add а vibrato*
effect to the flute sound, press
the MODULATION button [11]
as you play a note. (*Vibrato is
a gentle pitch fluctuation which
makes the flute sound very
realistic).
8) If you wish to add pitch
bends** to the notes you play,
simply press one of the PITCH
SHIFT buttons [12] as you play
a note.
(**A pitch bend is a playing
technique musicians use to
raise or lower the pitch of a
note being played.)
h) You can further enhance
any Tone by adding chorus and/
or reverb by pressing the
CHORUS button [55] and/or
REVERB button [54]
respectively. Chorus and reverb
simulate different spatial effects
which really make your music
sound good!
Using the same procedure
described on the previous page,
and the techniques just
described, you can enjoy all
128 Tones offered in Tone
Groups ‘A’ and ‘b’.