Roland E-66 - Environmental and Operational Warnings

* Be sure to use a 12 volt, 2A
AC adaptor (type ACJ or ASA)
with this unit.
* The power requirement for
this unit is indicated on the AC
adaptor. Ensure that the voltage
in your installation meets this
requirement.
• Do not use this unit on the
same power circuit with any
device that will generate line
noise; an electric motor or
variable lighting system for
example.
* During normal operation the
AC adaptor may become hot.
* [n the event of an electrical
storm,
discontinue
use
|
immediately
and
disconnect
the
и
y
ПП
|
|
К
AC
adaptor
from
the
wall
outlet.
POWER
(1)
* Before connecting this unit to
other devices, turn off the
power to all units; this will help
prevent damage or malfunction.
— THRU OUT IN
MIDI (5)
* Be sure to make proper and —
secure MIDI connections; loose
cables can cause a variety of
problems.
13