Roland E-66 - Page 23

29) TRANSPOSE Buttons.
These buttons are used to
transpose or change the pitch of
the entire instrument.
When the MIDI SELECT LED is
lit (43), these buttons
(TRANSPOSE ‘+’ and '-') are
used to change the value of the
selected MIDI parameter.
Pressing both buttons
simultaneously will select the
default (preset) value of the
selected parameter. Please refer
to STANDARD MODE
PARAMETERS (on page 94) and
GM MODE PARAMETERS (on
page 96).
30) STYLE LED.
When this LED is lit, the display
is indicating the selected Music
Style number.
31) DISPLAY.
The LCD shows the number of
the currently selected Music
Style or Tone (Group, Bank and
Number) or song. At the appro-
priate time it also displays in-
formation about other functions.
32) TONES LED.
When this LED is lit, the display
is indicating the selected Tone
number.
33) SONG LED.
When this LED is lit, the display
is indicating the selected Song
number.
34) DISK LED.
When this LED is lit, the disk
drive is operating.
30 Қ
ZEB
STYLE (30)
ы
к