Roland E-66 - Page 27

51) TONE VARIATION Button.
Some Tones have Variations
(sounds similar to the basic
Tone), and this button allows
you to access them.
Only the Tones marked by a >
have Variations (see Tones and
Variations Chart on page 103).
52) GROUP Button.
This button is used to select
Tone Group ‘A,’ or Tone Group
ғ.
53) ТОМЕ Select Buttons.
These buttons are used to select
Tones from either Group 'A' or
Group 'b.' (They are also used
to select Drum Sets when in the
Manual Drums mode.)
54) REVERB Button.
This button turns the digital
reverb on and off. When
pressed simultaneously to
CHORUS button [55], it
activates the GM mode.
55) CHORUS Button.
This button turns the digital
chorus effect on and off. When
pressed simultaneously to
REVERB button [54], it activates
the GM mode.
(For information on the use of
your E-66 in GM mode, please
refer to the GM section in this
manual on page 91).