Roland FR-8X - Bass Register on Current SET; Freebass Register on Current SET

Selecting Parameters
109
The display briey conrms this operation.
15.4 Bass register on current SET
This is an environment in its own right that has the
same functionality as “15.3 Treble register on
current SET”. It applies to the Bass registers of the
currently selected Set, however.
1. Select before the Set whose Bass registers you want to
edit simultaneously. See “How to Select Sets” (p. 42).
2. Use the [DATA/ENTER] knob to select the type of register
parameter you desire to edit for all Bass registers(“TYPE“).
The eld “VALUE” changes depending on the “TYPE” of selected
parameter. See the following table:
TYPE VALUE Explanation
Reed ALL,
Reed 16’,
Reed 8’,
Reed 8’-4’,
Reed 4’,
Reed 2’,
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition,
Steierische, Trikitixa, F-Jazz,
Classic3, Bajan
You can set the reed type for all
reed (“Reed ALL”) or for a specic
reed.
Vol All, Vol
16’, Vol 8’,
Vol 8’-4, Vol
4’, ’Vol 2’,
O, –40~“Std”~+40
You can set the reed volume for
all reed (“Vol All”) or for a specic
reed.
Noise,
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition,
Steierische, Trikitixa, F-Jazz,
Classic3, Bajan
It allows you to specify what
kind of instrument should
generate the noise.
Noise Vol, O, –40~“Std”~+40
It allows you to specify how
prominent the noise should be.
Reed Growl,
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition,
Steierische, Trikitixa, F-Jazz,
Classic3, Bajan
It allows you to choose the
typical instrument noise a bass
reed makes just before it stops
vibrating altogether (a kind of
“musical atulence” if you will).
Growl Vol O, –40~“Std”~+40
It allows you to specify how
prominent the noise should be.
3. Use the [DATA/ENTER] knob to set the value (“VALUE”).
4. Press the [MENU/WRITE] to proceed.
The following message is displayed:
5. To make your changes use the [DATA/ENTER] knob to
select “YES”. Otherwise, select “NO”.
The display briey conrms this operation.
15.5 FreeBass register on current SET
This is an environment in its own right that has the
same functionality as “15.4 Bass register on current
SET”. It applies to the Free Bass registers of the
currently selected Set, however.
1. Select before the Set whose Free Bass registers you want
to edit simultaneously. See “How to Select Sets” (p. 42).
2. Use the [DATA/ENTER] knob to select the type of
register parameter you desire to edit for all Free Bass
registers(“TYPE“).
The eld “VALUE” changes depending on the “TYPE” of selected
parameter. See the following table:
TYPE VALUE Explanation
Reed ALL,
Reed 16’,
Reed 8’,
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition,
Steierische, Trikitixa, F-Jazz,
Classic3, Bajan
You can set the reed type for all
reed (“Reed ALL”) or for a specic
reed.
Vol All, Vol
16’, Vol 8’,
O, –40~“Std”~+40
You can set the reed volume for
all reed (“Vol All”) or for a specic
reed.
Noise,
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition,
Steierische, Trikitixa, F-Jazz,
Classic3, Bajan
It allows you to specify what kind
of instrument should generate
the noise.
Noise Vol, O, –40~“Std”~+40
It allows you to specify how
prominent the noise should be.
Reed Growl,
Bandoneon, I-Folk, I-Folk2,
Classic, Cajun, Jazz, F-Folk,
D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition,
Steierische, Trikitixa, F-Jazz,
Classic3, Bajan
It allows you to choose the
typical instrument noise a bass
reed makes just before it stops
vibrating altogether (a kind of
“musical atulence” if you will).
Growl Vol O, –40~“Std”~+40
It allows you to specify how
prominent the noise should be.
3. Use the [DATA/ENTER] knob to set the value (“VALUE”).
4. Press the [MENU/WRITE] to proceed.
The following message is displayed:
5. To make your changes use the [DATA/ENTER] knob to
select “YES”. Otherwise, select “NO”.
The display conrms this operation.