Roland FR-8X - Basic Operation of the FR-8 X; About the Display and Cursor Operation; Main Screen Page; Moving between Windows and Setting Parameter

30
7. Basic Operation of the FR-8x
About the Display and Cursor Operation
This section introduces the information that appear on the main page in FR-8x’s display and how to navigate the menu.
Main Screen Page
Left hand tone eld
Right hand tones eld
Keyboard Mode:
Zone, High, Low
Name of the selected
audio song
Name of the current
Set or User Program
if selected
Battery level/power
source indicator
Moving Between Windows and Setting
Parameter Values
Using the following buttons you can navigate the menu, select the
setting you want to change and change it:
1. Press [MENU] button.
The display changes to:
The rst page of menu allows you to select the “1. Tuning” function
group.
2. Rotate the [DATA/ENTER] knob or press [UP] and [DOWN]
buttons to select the entry of the desired function group.
For this example, we will select “1. Tuning” (The rst Menu page).
3. Push the [DATA/ENTER] knob to go to the “1. Tuning”
function group.
The display changes to:
4. Rotate the [DATA/ENTER] knob or press [UP] and [DOWN]
buttons to select the parameter whose value you want to
change. For example “1.2 Transpose”.