Roland FR-8X - Adding User Program in the List; Inserting User Program in the List

Editing a User Program List
61
1. Load a User Program List
See “Loading a User Program List” (p. 60)
The display shows the list of User Program.
NOTE
A User Program List loaded from the USB memory cannot be
edited.
2. If necessary, rotate the [DATA/ENTER] knob to select the
User Program that you need to edit.
3. Press and hold the [USER PROGRAM] button until the User
Program edit page is shown:
Now you can:
Function Page Explanation
ADD User Program p. 61 Add User Programs at the end of the list.
INSERT User Program p. 61
Insert User Programs in a specied
position.
MOVE UP
p. 62
Change the order of existing User
Programs in your list.
MOVE DOWN
DELETE p. 62 Remove a User Program from the list.
CLEAR ALL p. 62 Remove all User Programs from the list.
If you try to exit from the User Program function and you edited a
User Program List, the following message appears:
Rotate the [DATA/ENTER] knob to select “YES”, then push the knob
to save the edited User Program List in the internal memory.
Select “NO” if you want to reject the changes.
Adding User Program in the List
This function add User Programs at the end of the list.
a. Rotate the [DATA/ENTER] knob to select “ADD User
Program “ and press the knob.
The display shows the list of User Program.
b. Rotate the [DATA/ENTER] knob to scroll the User
Program and press the knob to add the User Program in
the new list.
Repeat the step b to add other User Programs in the list.
MEMO
You can use the SET [][] buttons to scroll the User Program
in step of 14.
c. Press the [EXIT] button twice to return to the User
Program List page.
Your User Program has been added at the end of the list.
Inserting User Program in the List
This function insert a User Program in a specied position in the list.
In the step 2 of “Editing a User Program List” (p. 60) you selected
the insert position of the new User Program.
a. Rotate the [DATA/ENTER] knob to select “INSERT User
Program “ and press the knob.
The display shows the list of User Program.
b. Rotate the [DATA/ENTER] knob to scroll the User
Program and press the knob to insert the User Program
in the new list.
Repeat the step b to insert other User Programs in the list.
MEMO
You can use the SET [][] buttons to scroll the User Program
in step of 14.
c. Press the [EXIT] button twice to return to the User
Program List page.
Your User Program has been insert in the previous specied
position in the list.