Roland FR-8X - Import User Programs to the Optional USB Memory

Working with User Programs
66
9. Press the [WRITE] button to perform the operation.
The display shows the exporting is in progress. A conrmation
message is shown to indicate that exported function has nished.
If a le of the same name already exists, you are asked whether you
want to overwrite it.
In that case, select “YES” to replace the le. (Select “NO” to return to
the “SAVE” page.)
Then, push the [DATA/ENTER] knob.
Import User Programs to the Optional
USB memory
1. Insert the optional USB memory that should contain the
data to be imported into the FR-8x USB port.
2. Press the [MENU] button and use the [DATA/ENTER] knob
to select the following page:
For more information about how to navigate see
“Selecting Parameters Via the Menu” (p. 68).
3. Rotate the [DATA/ENTER] knob to select the “Type” eld
and push it.
4. Rotate the [DATA/ENTER] knob to select “User Program”
eld and push it.
5. The display changes as follows:
6. Use the [DATA/ENTER] knob to select “User Prog. File”
eld.
Now you can choose one of the following options:
Value Explanation
ALL
Select “ALL” to import All User Programs.
NOTE
Selecting this function all User Programs in the FR-8x
internal memory will be replaced.
Bank Select “Bank” to import all User Programs of the selected bank.
Single Select “Single” to import the single User Program.
If you selected “ALL”
a. Press the [MENU/WRITE] button
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
b. Rotate the [DATA/ENTER] knob to select a le with “UPA”
extension.
c. Press the [MENU/WRITE] button to proceed.
The display shows the importing is in progress. A conrmation
message is shown to indicate that the import function has nished.
If you selected “Bank”
a. Use the [DATA/ENTER] knob to select “UPG Dest. Bank”
to set the number of bank that you want to import.
b. Press the [MENU/WRITE] button
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
c. Rotate the [DATA/ENTER] knob to select a le with “UPB”
extension.
d. Press the [MENU/WRITE] button to proceed.
The display shows the importing is in progress. A conrmation
message is shown to indicate that the import function has nished.