Roland FR-8X - Page 67

Export and Import User Programs to/from the Optional USB memory
67
If you selected “Single”
a. Use the [DATA/ENTER] knob to select “UPG Dest. Bank”
to set the number of bank of User Program that you
want to import.
b. Use the [DATA/ENTER] knob to select “UPG Dest. Num”
to set the number of User Program that you want to
import.
c. Press the [MENU/WRITE] button.
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
d. Rotate the [DATA/ENTER] knob to select a le with “UPG”
extension.
e. Press the [MENU/WRITE] button to proceed.
A conrmation message is shown to indicate that import function
has nished.