Selecting Parameters
69
The [10] register is used to enter the number “0”.
To select group “1”, for instance, you need to press register [10], then
register [1]. To select the group “12”, rst press register [1], then
register [2].
NOTE
If you only press one register ([5], for example), the FR-8x
automatically selects the group [5] after ±2 seconds.
3. Use the right hand registers [1]~[10] to specify the
number of page parameter.
NOTE
If you only press one register ([3], for example), the FR-8x
automatically selects the number [3] after ±2 seconds.
The parameter page is displayed.
Available Parameters List
NOTE
Some parameter groups cannot be selected if the related
section is not activated. For example if the Orchestra 1 section
is not activated ([ORCH1] button doesn’t light), the “Orchestra 1
Edit” is not accessible.
1 Tuning
1.1 Master Tune p. 71
1.2 Transpose p. 71
1.3 Scale Tune p. 71
1.4
Scale Tune Edit p. 71
2 Accordion Edit
2.1
Reed Type p. 71
2.2
Register p. 71
2.3
Eects Send p. 72
2.4
MFX Edit p. 72
2.5
MFX Control p. 73
2.6
Controllers p. 73
2.7
MIDI TX p. 73
2.8
Name p. 75
3 Bass Edit
3.1
Reed Type p. 75
3.2
Register p. 75
3.3
Noises p. 76
3.4
Eects Send p. 76
3.5
Controllers p. 76
3.6
BASS MIDI TX p. 76
3.7
CHORD MIDI TX p. 76
3.8
Name p. 77
4 FreeBass Edit
4.1
Reed Type p. 77
4.2
Register p. 77
4.3
Eects Send p. 78
4.4
Controllers p. 78
4.5
FREE BASS MIDI TX p. 78
4.6
Name p. 79
5 Orchestra 1 Edit
5.1
Tone Selection p. 79
5.2
Eects Send p. 79
5.3
MFX Edit p. 80
5.4
MFX Controls p. 80
5.5
Sound Edit p. 80
5.6
Controllers p. 81
5.7
MIDI TX p. 81
6 Orchestra 2 Edit
6.1
Tone Selection See Or-
chestra
1 Edit
6.2
Eects Send
6.3
MFX Edit
6.4
MFX Controls
6.5
Sound Edit
6.6
Controllers
6.7
MIDI TX
7 Organ Edit
7.1
Organ Selection p. 82
7.2
Organ Parameters p. 83
7.3
VTW Upper p. 84
8 Orch Bass Edit
8.1
Tone Selection p. 84
8.2
Tone Control p. 84
8.3
Eects Send p. 85
8.3
VTW Pedal Parameters p. 85
8.4
Sound Edit p. 86
8.5
Controllers p. 86
8.6
MIDI TX p. 87
8.7
VTW Pedal p. 87
To Next Page
Loading...
