Roland FR-8X - Moving up or down a User Program in a Different; Position the List; Deleting a User Program from the List; Deleting All User Programs from the List

Working with User Programs
62
In the example above the “Paris” was inserted.
Moving up or down a User Program in a
Dierent Position the List
You can also change the order of existing User Programs in your list.
In the step 2 of “Editing a User Program List” (p. 60) you selected
the User Program to move to a dierent position.
a. Rotate the [DATA/ENTER] knob to select “MOVE UP“ or
“MOVE DOWN”.
b. Press the [DATA/ENTER] knob to move the selected User
Program towards the beginning (if you pressed “MOVE
UP”) or towards the end of the list (if you pressed “MOVE
DOWN”).
c. Press the [EXIT] button to return to the User Program
List page.
Your User Program has been moved in the list.
In the example above the “Paso Dob” was moved up.
Deleting a User Program from the List
You can also remove a User Program that you no longer need.
In the step 2 of “Editing a User Program List” (p. 60) you selected
the User Program to remove.
a. Rotate the [DATA/ENTER] knob to select “DELETE“.
b. Press the [DATA/ENTER] knob to remove the selected
User Program.
The display changes to:
c. Rotate the [DATA/ENTER] knob to select “YES”, then push
the knob to remove the User Program selected.
Select “NO” if you do not want to remove the User Program after all.
Your User Program has been removed from the list.
Deleting All User Programs from the List
This function remove all User Program from the List.
a. Rotate the [DATA/ENTER] knob to select “CLEAR ALL“.
b. Press the [DATA/ENTER] knob to remove All User
Programs from the list.
The display changes to:
c. Rotate the [DATA/ENTER] knob to select “YES”, then push
the knob to remove all User Programs from the list.
Select “NO” if you do not want to remove the User Programs after
all.
All User Programs have been removed from the list.
How to rename a User Programs List
The FR-8x gives you the possibility to rename a User Program List.
1. Press the [USER PROGRAM] button.
A page like this appears:
2. Press the [UP] button to open the “USER PROGRAM LIST”
page.
The display shows the following page: