Roland FR-8X - Menu Options; Selecting Parameters; Selecting Parameters Via the Menu; Select Parameters Using Jump Function

68
15. Menu Options
The FR-8x’s [MENU] button provides access to the available
parameters and functions.
Selecting Parameters
The FR-8x’s parameters can be selected by using the Menu structure
or entering their numbers.
Selecting Parameters Via the Menu
1. Press the [MENU] button.
The display changes to:
2. Rotate the [DATA/ENTER] knob or use the [UP]/[DOWN]
buttons to select the desired function groups.
3. Push the [DATA/ENTER] knob to enter that group.
The display now responds with (this depends on the function group
you selected).
In the example above we selected the group 2 Accordion Edit.
4. Rotate the [DATA/ENTER] knob to select the group of
parameters you wish to edit.
In the example above we selected the group 2.3 Eects Send.
5. Push the [DATA/ENTER] knob to activate the rst
parameter for editing.
The rst parameter is highlighted.
6. Rotate the [DATA/ENTER] knob to change the value.
7. Push the [DATA/ENTER] knob to conrm your setting and
activate for editing the possible next parameter.
If a display page contains more then one adjustable parameters,
you may have to repeat the procedure from step 6.
8. Press the [EXIT/JUMP] button twice to return to the
function group.
Select Parameters using Jump Function
If you already know which parameter you want to change, you can
also select it directly:
1. While the main page is displayed, press and hold the
[EXIT/JUMP] button.
The following pop-up window appears:
2. Use the right hand registers [1]~[10] to specify the
number of the desired group parameter.
See “Available Parameters List” (p. 69).