Roland FR-8X - Working with User Programs; About the User Program Memory Structure; Saving an User Program; Recalling a User Program

57
14. Working with User Programs
The FR-8x provides User Program memories that allow you to store
almost all settings you make on the front panel and the various
display pages. In additional the User Program store the selected Set.
See “10. Using Sets” (p. 42).
About the User Program Memory
Structure
User Programs reside in the internal memory or on a optional USB
memory.
The FR-8x contains up to 1400 User Programs in the internal
memory. They are divided in banks and numbers. The FR-8x
contains 100 banks. Each bank contains 14 memories that can be
selected by the Right Hand registers [1~14].
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 2 3 4 5 6 7 8 9 10 11 12 13 14
User Program Internal Memories
Right Hand Registers
Bank 1
Bank 2
Bank 100
Saving an User Program
1. Select all settings you would like to use.
You can, for instance, select Set, select the desired section and
assign the desired Tones for each section, select the set that you
want to use, modify all settings you need, etc.
2. Press and hold the [MENU/WRITE] button to jump to the
“Write” page.
The display shows a page like this:
3. Use the [DATA/ENTER] knob to select “User Program”.
4. Press [WRITE] to proceed.
The following page appears:
5. Rotate the [DATA/ENTER] knob to set the “BANK” where
you want to save your User Program. Push the [DATA/
ENTER] knob to conrm.
6. Rotate the [DATA/ENTER] knob to set the “NUMBER” where
you want to save your User Program. Push the [DATA/
ENTER] knob to conrm.
7. Press [WRITE] to save your User Program.
The following page appears:
The FR-8x suggests a name.
8. Use the [DATA/ENTER] knob to enter the desired name.
See “How to type a name in FR-8x” (p. 31).
9. Press the [WRITE] button to save the User Program.
After a while the display briey conrms the operation.
Recalling a User Program
Here is how to select a User Program.
1. Press the [USER PROGRAM] button. Its indicator lights.
The following page appears:
Select an User Program by its list
2. Rotate the [DATA/ENTER] knob to view the list of 1400
User Programs.
3. Pushing the [DATA/ENTER] knob you can recall the
selected User Program.