Play List Function
51
10. Select the song to add by rotating the [DATA/ENTER] knob
and push it to conrm.
The following temporary message appears to indicate that the song
was added to Play List.
The display shows again the contents of the USB memory.
11. To insert other songs repeat from the step 9.
12. Press [EXIT/JUMP] several time until the display shown the
Play List with the new songs.
This takes you back to the following page.
Cursor
Song Loaded
The songs are assigned to step 1, 2 and 3.
Your Play List is now ready to be used. See “Using Play List” (p.
52).
How to Load Play List
1. Insert the optional USB memory that contains the desired
song les into the FR-8x’s USB port.
2. Press the [SONG LIST] button
The display shows the contents of the USB memory.
3. Rotate the [DATA/ENTER] knob to select the Song List le
(PLS) you want to load. Push the [DATA/ENTER] knob to
conrm.
The Play List is loaded and the display shows the content of Play List.
Now you can either edit the loaded Play List or use it as is.
See “Editing an Existing Play List” (p. 51).
See “Using Play List” (p. 52).
Editing an Existing Play List
While programming or using a Play List, if you notice that one song
is missing from the list, or if you decide not to use a given song le
after all, you can edit your Play List.
1. Load a Play List.
See “How to Load Play List” (p. 51).
2. Press and hold the [SONG LIST] button to jump to the
“EDIT PLAY LIST” page.
The display changes to:
The following edit functions are available:
Function Explanation
SAVE AS
This function is useful to copy the current Play List into
another one with a dierent name. See “Editing a Play List
Starting from an Existing One.” (p. 52).
ADD SONG Add new songs to the current Play List.
MOVE UP
The selected song is moved one step upwards in the Play
List..
MOVE DOWN
The selected song is moved one step downwards in the
Play List.
REMOVE The selected song is removed from the Play List.
CLEAR ALL Clear all songs in the Play List.
To Next Page
Loading...
