Roland FR-8X - Import Sets to the Optional USB Memory; Import FR-7 X Sets from the Optional USB Memory

Import FR-7x Sets from the Optional USB memory
45
In that case, select “YES” to replace the le. (Select “NO” to return to
the “SAVE” page.)
Then, push the [DATA/ENTER] knob.
A conrmation message is shown to indicate that exported
function has nished.
Import Sets to the Optional USB memory
1. Insert the optional USB memory that should contain the
data to be imported into the FR-8x USB port.
2. Press the [MENU] button and use the [DATA/ENTER] knob
to select the following page:
For more information about how to navigate see
“Selecting Parameters Via the Menu” (p. 68).
3. Rotate the [DATA/ENTER] knob to select the “Type” eld
and push it.
4. Rotate the [DATA/ENTER] knob to select “SET” eld and
push it.
5. The display changes as follows:
6. Use the [DATA/ENTER] knob to select “SET File” eld.
Now you can choose one of the following options:
Value Explanation
ALL
Select “ALL” to import All Sets.
NOTE
Selecting this function all Sets in the FR-8x internal memory
will be replaced.
Single Select “Single” to import the single Set.
If you selected “ALL”
a. Press the [MENU/WRITE] button
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
b. Rotate the [DATA/ENTER] knob to select a le with “FR8”
extension.
c. Press the [MENU/WRITE] button to proceed.
The display shows the importing is in progress. A conrmation
message is shown to indicate that the import function has nished.
If you selected “Single”
a. Use the [DATA/ENTER] knob to select “Dest. SET” to set
the number of Set that you want to import.
b. Press the [MENU/WRITE] button.
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
c. Rotate the [DATA/ENTER] knob to select a le with “ST8”
extension.
d. Press the [MENU/WRITE] button to proceed.
A conrmation message is shown to indicate that import function
has nished.
Import FR-7x Sets from the Optional
USB memory
The FR-8x gives you the possibility to import FR-7x SETs.
FR-7x SETs that you import are converted in User Program
memories. Each single SET of FR-7x is converted in 14 User Program
memories.
All SET of FR-7x occupy 1120 FR-8x User Programs memories.
For more information see “15.8 IMPORT” (p. 110).