Roland FR-8X - Recalling a User Program from the Main Page

Working with User Programs
58
Scrolling the User Program by Banks
This method is more convenient scroll User Programs if you know
the bank number.
2. Use the SET [][] buttons to decrement or increment
the User Program memory Bank.
In the example above we pressed [] button.
3. Use the Right Hand register [1]~[14] buttons to recall the
number of User Program desired in the selected bank.
NOTE
The Set linked to a User Program is loaded in the Set Working
Area (W.A). See “10. Using Sets” (p. 42).
4. Press the [USER PROGRAM] button to exit from the User
Program function. Its indicator goes dark.
Select a User Program by Bank and Number
If you already know which User Program you want to use, you can
also select it directly:
1. While the User Program function is active, press and hold
the SET [] or [] button.
The following pop-up window appears:
2. Use the right hand registers [1]~[10] to specify the
number of the desired User Program bank.
The [10] register is used to enter the number “0”.
To select bank “1”, for instance, you need to press register [10],
then register [1]. To select the bank “37”, rst press register [3], then
register [7].
NOTE
If you only press one register ([5], for example), the FR-8x
automatically selects the bank [5] after ±2 seconds.
3. Use the right hand registers [1]~[10] to specify the
number of User Program.
NOTE
If you only press one register ([3], for example), the FR-8x
automatically selects the number [3] after ±2 seconds.
Recalling a User Program from the
Main Page
The FR-8x gives you the possibility to recall the User Programs from
the Main page. It can be useful to watch the parameter shown in
the Main page and access the Menu options.
1. Press the [USER PROGRAM] button. Its indicator lights.