About the User Program List
59
The following page appears:
2. Press and hold the [EXIT/JUMP] button until the Main
page is shown.
3. Use the SET [][] buttons to decrement or increment
the User Program memory Bank.
4. Use the Right Hand register [1]~[14] buttons to recall the
number of User Program desired in the selected bank.
The User Program that you recalled is shown in the Main page:
5. Press and hold the [USER PROGRAM] button if you want to
come back to the page of the User Program list.
6. Press the [USER PROGRAM] button if you want to exit
from the User Program function. Its indicator goes dark.
About the User Program List
To keep this massive amount of information manageable, the FR-8x
works with User Program Set Lists.
The User Program List is a list of up to 1400 Performance memories.
The User Program memories you create are saved in a User
Program List. This allows you to prepare one set of User Program
memories for weddings, another for corporate events, a third for
anniversaries, etc. The User Program Lists can be exported on a USB
memory.
Preparing a New User Program List
This function allows you to create a new User Program List. See
“About the User Program List” (p. 59).
1. Press the [USER PROGRAM] button.
A page like this appears:
1. Press the [UP] button to open the “USER PROGRAM LIST”
page.
The display shows the following page:
To Next Page
Loading...
