Roland FR-8X - Page 65

Export and Import User Programs to/from the Optional USB memory
65
Value Explanation
List Select “List” to export a User Program List.
If you selected “ALL”
a. Press the [MENU/WRITE] button.
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
b. Continue to the step 7
If you selected “Bank”
a. Use the [DATA/ENTER] knob to select “User Prog. Bank”
eld to set the number of bank that you want to export.
b. Press the [MENU/WRITE] button.
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
c. Continue to the step 7
If you selected “Single”
a. Use the [DATA/ENTER] knob to select “User Prog. Bank”
to set the number of bank of User Program that you
want to export.
b. Use the [DATA/ENTER] knob to select “User Prog. Num”
to set the number of User Program that you want to
export.
c. Press the [MENU/WRITE] button
The display shows the root folder of the USB memory.
To open an existing folder, select it by rotating the [DATA/ENTER]
knob, then press the [DATA/ENTER] knob. Press the [EXIT/JUMP]
button to return to a higher level (i.e. leave the current folder).
d. Continue to the step 7
If you selected “List”
a. Press the [MENU/WRITE] button
The display shows the list of all User Program List:
b. Rotate the [DATA/ENTER] knob to select the list of User
Program that you want to export and push it.
The display shows the following page:
c. Continue to the step 8
7. Press the [MENU/WRITE] button
The display shows the following page like this:
8. Use the [DATA/ENTER] knob to enter the desired name.
See “How to type a name in FR-8x” (p. 31).