Roland FR-8X - Page 43

How to Save a Set
43
3. Use the [DATA/ENTER] to select “Set”.
4. Press [WRITE] to proceed.
5. Rotate the [DATA/ENTER] knob to select the Set.
Value Explanation
All, 1~100
Allows you to save Sets (either a specic one or all).
• All: Save all Set
• 1~100: Save the selected Set
6. Press [WRITE] to proceed.
The display shows:
In this page you can choose the parameters you want to save.
7. Use the [DATA/ENTER] knob to edit the desired
parameter.
Parameter Value Explanation
Set All, 1~100
Allows you to save Sets (either a specic
one or all).
• “All”: Save all Sets.
• “1~100”: Save the selected Set.
Common No, Yes
Select “Yes” to save the Common Group
parameters ( p. 97). Default: “Yes” .
Accordion No, All, 1~14
Allows you to save the Accordion
registers.
• “No”: The Accordion registers are not
saved.
• “All”: Save all registers (1-14).
(Default).
• “1~14”: Save the selected register.
Parameter Value Explanation
Bass No, All, 1~7
Allows you to save the Bass registers.
• “No”: The Bass registers are not saved.
• “All”: Save all registers (1-7). (Default).
• “1~7”: Save the selected register.
Free Bass No, All, 1~7
Allows you to save the Free Bass registers.
• “No”: The Free Bass registers are not
saved.
• “All”: Save all registers (1-7). (Default).
• 1~7: Save the selected register.
Orch 1/Organ No, All, 1A~14B
Allows you to save the Orchestra 1/Organ
registers.
• “No”: The Orchestra 1/Organ registers
are not saved.
• “All”: Save all registers (1A-14A,1B-
14B). (Default).
• “1A~14B”: Save the selected register.
Orchestra 2 No, All, 1A~14B
Allows you to save the Orchestra 2
registers.
• “No”: The Orchestra 2 registers are
not saved.
• “All”: Save all registers (1A-14A,1B-
14B). (Default).
• “1A~14B”: Save the selected register.
Orch. Bass No, All, 1~7
Allows you to save the Orch. Bass
registers.
• “No”: The Orch. Bass registers are not
saved.
• “All”: Save all registers (1-7). (Default).
• “1~7”: Save the selected register.
Orch. Chord No, All, 1~7
Allows you to save the Orch. Chord
registers.
• “No”: The Orch. Chord registers are
not saved.
• “All”: Save all registers (1-7). (Default).
• “1~7”: Save the selected register.
Orch. Fbass No, All, 1~7
Allows you to save the Orch. FBass
registers.
• “No”: The Orch. FBass registers are
not saved.
• “All”: Save all registers (1-7). (Default).
• “1~7”: Save the selected register.
8. Press [WRITE] to save.
The following pop-up window appears:
At the end of saving the display will show “Write complete!”