Roland RS-5 - Page 127

127
Chapter 11. Recording Performances on the RS-5/9 to an External Device
Chapter 11
Connect the RS-5/9 to your computer using the method that is appropriate for your setup.
1. Before starting the connection procedure, make sure that the power to all devices has been turned off.
2. After reading “Connecting the RS-5/9 to external equipment” (p. 14), connect an audio device/system or headphones.
3. Connect the RS-5/9 and the computer as shown below.
4. As described in “Turning On the Power” (p. 15), turn on the power of each device.
fig.R11-06exp
I
N
MIDI
O
U
T
UM-1
UM-2
RS-5/9 Rear Panel
RS-5/9 Rear Panel
RS-5/9 Rear Panel
RS-5/9 Rear Panel
RS-5/9 Rear Panel
UM-4
MIDI INMIDI OUT
USB Connector
of your Computer
USB Connector
of your Computer
USB Connector
of your Computer
Computer
Computer
Computer
PC
USB Cable
MIDI Cable
MIDI Cable
MIDI Cable
MIDI Cable
MIDI Cable
MIDI Cable
MIDI Cable
MIDI Cable
USB Cable
MIDI Interface Adapter
Apple Macintosh series
Modem or
Printer Port
MIDI
Interface