Roland RS-5 - Selecting Tones by Category (TONE CATEGORY)

23
Playing the Sounds
Playing the Sounds
Selecting Tones By Category
(TONE CATEGORY)
The RS-5/9 features a Tone Search function that allows you to rapidly
select and call up Tones by specifying the type of tone (Category). The 35
categories are organized into 10 groups.
fig.Q-15
1
Press [PERFORM/TONE] to call up the Tone Search screen.
2
Make sure that the [TONE CATEGORY] indicator is lit.
If the [TONE CATEGORY] indicator is not lit, press [TONE CATEGORY]
once more.
fig.Q-16exp
3
Press the numeric keys ([1]–[0]) a number of times until you
can select the Category you want.
4
Press VALUE [-]/[+] to select a Tone in the currently selected
Category.
When shipped from the
factory, [TONE CATEGORY]
is set to “ON.”
3412
Should “PERFORM” be
displayed, simply press
[PERFORM/TONE] once
more, and the Tone
selection screen is
displayed.
Tone Group
Tone Number
Part
Tone NameTone selection screen
Category