Roland RS-5 - Page 27

27
Playing the Sounds
Playing the Sounds
4
Press the numeric keys ([1]–[0]) to specify the Tone number
(User: 1–128, Preset: 1–512).
5
Press [ENTER] to finalize the entry.
If you make a mistake,
press [EXIT] and specify
the number once more.
Instead of using Steps 4
and 5, you can also switch
Tones by pressing VALUE
[-]/[+].
Changing values by large amounts
When changing values on the RS-5/9, press VALUE [-]/[+]. You can change
values by large amounts using the methods described below.
To increase the value, hold down VALUE [+] and press VALUE [-].
To decrease the value, hold down VALUE [-] and press VALUE [+].
To increase the value in units of ten, hold down [SHIFT] and press VALUE [+].
To decrease the value in units of ten, hold down [SHIFT] and press VALUE [-].
When you want to know the name and number of the Tone
• “Tone List” (p. 148)
When you want to know how to switch Tones with Key Mode set to
Split or Dual
• “Selecting Tones and Drum Sets” (p. 37)
To create Tones by yourself
• “Creating a Tone” (p. 110)
When you want to store a Tone you have created to User memory
• “Saving Tone / Drum Set / Performance” (p. 113)
When you want to switch Tones from an external MIDI device
• “Selecting RS-5/9 Sounds from an External MIDI Device” (p. 123)