Roland RS-5 - Page 49

49
Using the Convenient Functions in Performances
Using the Convenient Functions in Performances
fig.Q-56
1
Press [EDIT], getting the indicator to light.
2
Use VALUE [-]/[+] to select “Tone/Drum/PFMCommon.”
3
Press [ENTER].
4
Press [9] a number of times to select “Transpose.”
fig.Q-57
5
Press VALUE [-]/[+] to select the value (-36 to +36).
6
Press [EDIT].
The [EDIT] indicator goes out, and you are returned to the previous screen.
2,5
31,6
4
Note messages from MIDI
IN connector will not be
transposed.
If you hold down [SHIFT]
and press [9], you will
return to the previous item.
An easy way to set Transpose
You can select the “Transpose” screen directly by holding down
[TRANSPOSE ON/OFF] and pressing [EDIT]. Make settings as explained in
steps 5–6 of the above procedure.
Furthermore, to change the transposition even more rapidly, you can change
only the “Transpose” setting by holding down [TRANSPOSE ON/OFF] and
pressing VALUE [-]/[+]. When you release [TRANSPOSE ON/OFF], the
previous display will reappear.
When you want to transpose a specific Part
• “Transposing a Specified Part (Key Shift)” (p. 69)