Roland V-Drums TD-8 - Using the Pop-Up Menus

19
Button Operation and Displays
When the function of these function buttons are shown in the
display as follows, the functions will change while you press
[SHIFT].
fig.006
If
1. Press [SHIFT] + [F1 (PART 2)].
appears in the text, then carry out the operation below.
1. While holding down [SHIFT], press [F1] (in this case, “PART 2”
appears above [F1]).
Using the Pop-Up Menus
As with [F3 ( MENU)], when the function button that displays “ ” is
pressed, the following menu-like screen appears in the display. This menu
is called a pop-up menu. You can move the cursor within the menu with the
[INC/+] or [DEC/-] buttons, the VALUE dial, or the [ ] or [ ] buttons.
After this, when you once again press a function button under the pop-up
menu, the settings screen then appears.
fig.007
Example:
Carry out the following operation.
1. Press [KIT].
[KIT] lights, and the “DRUM KIT” screen appears.
fig.007a
2. Press [F3 ( MENU)].
A pop-up menu appears.
fig.008
Press [SHIFT]
Press [EXIT] to cancel the
operation. A pop-up menu
is extinguished.