79
Chapter 1 Making the Settings for the Drum Kit
Chapter 1
Naming the Drum Kit [NAME]
Each kit can be given a name of up to 8 characters.
fig.02-002
1. Press [KIT], then [F3 ( MENU)].
[KIT] lights, and a pop-up menu appears.
2. Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [ ] or [ ] to move the cursor to
“NAME.”
3. Press [F3] to confirm your choice.
The “DRUM KIT NAME” screen appears.
4. Press CURSOR [F1 (LEFT )] or [F2 (RIGHT )] to
move the cursor to the character to be changed.
5. Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [ ] or [ ] to change the character.
6. Press [EXIT] to finish.
[F1 (LEFT )]
Move the cursor to the left.
[F2 (RIGHT )]
Move the cursor to the right.
[F3 (CHAR)]
Cycle between uppercase/lowercase/symbols.
[SHIFT] + [F1 (INSERT)]
A blank space is inserted at the cursor position, and the
characters after the insertion are moved back one space.
[SHIFT] + [F2 (DELETE)]
The character at the cursor position is deleted, and the
characters after the deletion are moved forward one
space.
[SHIFT] + [F3 (SPACE)]
The character at the cursor position is replaced by a
blank space.
The following characters may be used.
A–Z, a–z, 0–9,!, ”, #, $, %, &, ’, (, ), [, ], *, +, ,, -, ., /, :, ;,
, =, , ?, _, , , , , ,
, ,
Press [SHIFT]
To Next Page
Loading...
