Roland V-Drums TD-8 - Choosing an Drum Instrument

54
Modifying a Drum Kit
Choosing an Drum Instrument
fig.Q4-009
1
Follow the procedures described in “Choosing Drum Kits” (p. 44) to
select the drum kit to be edited.
Here, select the Drum Kit 1, “V Custom.”
The “DRUM KIT” screen appears.
fig.Q4-010
2
Press [F1 (INST)].
The “INST” screen appears.
3
Strike the pad for the instrument you wish to change.
In this case, strike the pad being used as the snare drum.
The instrument select page for the snare appears in the display.
fig.Q4-012
1, 5
1
4
2
When making rim settings,
the two steps described
b
elow apply.
• Striking both the head
and the rim.
• Striking only the head,
then press [RIM].
• TRIGGER INPUT 1
(KICK1), 2 (KICK2), 11
(AUX1), and 12 (AUX2)
cannot be selected for
the rim.
• TRIGGER INPUT 2
(KICK2) and 12 (AUX2)
can be used only when
two pads are connected
to TRIGGER INPUT 1/2
(KICK1/2) or 11/12
(AUX2), respectively (p.
27).